Computer Color Maching Sytem (CCM)
IR Type Dyeing Machine (New)
IR-DYER has the features of low liquid ratio & excellent dyeing repeatability & leveling result. Most clean & energy-saving way of sample dyeing.
• Temperature range: 40~140°C
• Rotary speed: 5~60 RPM (Reversible design)
• Volume of beaker: 400, 550ml
• Cooling: Air cooling type • Electric data: 220/380V x 36 x 10KW
• Number of beakers: 18 positions
• Machine dimension: W81 x D76 x H82cm
Dypot Capacity: 150, 300, 500cc
Jumbo Dye pot: 1200, 3000, 6000cc
IR Dyeing Machine.
Name: Laboratory Oscillating dyeing machine/Mechanical Shaker
| Model | L-12, L-24 |
| Explanation |
This oscillating type of laboratory dyeing machine was made for replacing the old conventional pots or bottles. Operator can dye many pots at one time and manually adding chemicals during process. l Temperature range：Below 98℃ l Rotate speed：50~200RPM / min l Electric data：220V x 1PH x 3(6)KW l Size of flask：250 / 400cc conical flask 250cc wide mouth flask l Has 12 dyeing positions or 24 in one compartment 24 pots dyeing positions in 2 compartments for different working conditions. |
| Name | Laboratory leather dyeing machine |
| Model | H-4+4 / H-8+8 |
| Explanation |
This machine is used in tanning, fatliquoring and dyeing in the engine of leather. User adds infiltrate agent into the dyeing drum, then adds the good light fastness dye and leveling dye agent. When the dyeing drum is rotating, leathers would deeply rubs with each other. This action is helpful for the colors to penetrate into the deeper and harder parts of the leather. It suits leather、thick non-woven fabric and finishing treatment works. l Electric data：220 / 380V x 3 PH x 12KW (or specify) l Rotary speed：0~60RPM adjustable l Drum size：acrylic made (Small) Diameter150Φ x 114L (hole dia.60Φ) (Big) Diameter250Φ x 111L (hole dia. 67Φ) l Machine dimension：H-(4+4)-116 x 73 x (76+42) cm、 H-(8+8)-182 x 73 x (76+42) cm |
| Name | Laboratory Drum dyeing machine |
| Model | DR-TYPE |
| Explanation |
This machine is specially designed for dyeing ability test of false twisted yarns & the shrinkage test of hosiery yarns. Commonly used for small lot of scouring, dyeing & washing or stone wash effects. Inside of the drum can be divided into 2 or 3 compartments with programmed reversal turnings ensure the leveling dyeing results without tangling of the dyeing substrates. l Temperature range：Below 98°C l Speed of rotation：30RPM or specify l Drum dimension：Diameter 20 inches, width 20 inches l Electric data：220 / 380V x 3PH x 18KW |
| Name | Laboratory cooling circulator bath |
| Model | LW-24 |
| Explanation |
This testing machine is to heat the water or oil and to maintain it under constant temperature for a variety of tests. Such as soaping、restore washing and so on. It is widely used in the research department of petroleum, chemical industry, electronic instruments, physical, chemistry, biological engineering, medical and health, life sciences, light industry, food, material testing, chemical analysis and so on, institutions of learning, quality control of cooperation and manufacture department. l Digital indicate controller l 24 dye positions l Beakers are made of SUS 316L. l Electric data：220V x 1PH x 3KW l Equips with 24 beakers (500cc capacity) |
| Name | Laboratory Hot circulation exact oven |
| Model | RHDM-452 |
| Explanation |
This machine is made to the inside one-way level blows and circulates by force, PID Automatic calculation, Touch setting, Digital Temperature Controller that can be accurate to ±0.5°C and averaged to ±1.5%. Outside material is SECC steel plate which is been coated, inside material is stainless steel. It attaches two pieces drawers and over-temperature and over-current safe equipment, durable, safe and reliable. l Temperature range：+20°C~250°C l Inside size：W45 cm x H40 cm x D40 cm l Outside size：W66 cm x H82 cm x D52 cm l Voltage：110 / 220 V l Capacity：72L l Current：2.6KW |
| Name | Laboratory Hot circulator exact oven |
| Model | RHDM-602 |
| Explanation |
This machine is made to the inside one-way level blows and circulates by force, PID Automatic calculation, Touch setting, Digital Temperature Controller that can be accurate to ±0.5°C and averaged to ±1.5%. Outside material is SECC steel plate which is been coated, inside material is stainless steel. It attaches two pieces drawers and over-temperature and over-current safe equipment, durable, safe and reliable. l Temperature range：+20°C~260°C l Inside size：W50 cm x H50 cm x D60 cm l Outside size：W75 cm x H62 cm x D116 cm l Voltage：110 / 220 V l Capacity：150L l Current：4.6KW |
| Name | Laboratory Hot circulation exact oven |
| Model | RHDM-902 |
| Explanation |
This machine is made to the inside one-way level blows and circulates by force, PID Automatic calculation, Touch setting, Digital Temperature Controller that can be accurate to ±0.5°C and averaged to ±1.5%. Outside material is SECC steel plate which is been coated, inside material is stainless steel. It attaches four pieces drawers and over-temperature and over-current safe equipment, durable, safe and reliable. l Temperature range：+20°C~260°C l Inside size：W60 cm x H50 cm x D90 cm l Outside size：W83 cm x H68 cm x D158 cm l Voltage：110 / 220 V l Capacity：270L l Current：5.5KW l Timer(optional)：Hold time max. up to 999mins |
| Name | Laboratory stereotypes dryer |
| Model | M-3 |
| Explanation |
This machine is an economic and discontinuous type of tenter. It also simulates the thermosol process. It equips with special design needle pin frame to fix the knitted and woven fabric and check the color change and curing. When it is in conjunction with Laboratory padding mangle, value-added sample can be produced and submitted to customer. l Temperature range：20°C ~ 250°C l Time control：It can do automatic timing for 1-9999 seconds after the frame is feed and automatically exit. l Electric data：220 V x 1PH x 6KW l Effective sample size：28 x 34 cm l Machine dimension：134 x 68 x 78 cm |
| Name | Laboratory HT-steamer |
| Model | HTS-3 |
| Explanation |
Besides curing function, this steamer is specially designed for fixation of the dyestuffs of printed goods. It can check the color shades in advance to avoid mistakes & losses to increase the efficiency of printing machines & paste preparations. l It performs well on saturated steaming at 102°C、high temp steaming process (102°C~220°C) and curing (20°C~220°C) as well. l Effective sample size：28 x 34 cm l Electric data：220V x 1PH x 6KW l Steam consumption：(Indirect) 5kg / hour (Direct) 15kg / hour l Steam boiler is optional. |
| Name | Laboratory Electric Steamer Boiler |
| Model | EB-24KL |
| Explanation |
l WATER PIPE TYPE INTERNAL BOILER MADE BY SPECIAL SEAMLESS STEEL TUBE, STRONG AND DURABLE, LONG LIFE, HIGH RESSURE-RESISTING. l DOUBLE SEALED GLASS FIBRE NON-CONDUCTING DEVICE, PREVENTS FORM HEAT LOST AND SAVES FUEL TO REACH HIGEST EFFECT OF HEAT INVALUATTION. l EASY TO INSTAL, WON’T BE LIMITED BY SPACE, ENCLOSED DOUBLE DEVICES OF SUPER HIGH TEMPERATURE AND SUPER HIGH PRESSURE SAVE VALVE, SAFE AND RELIABLE. l Max working pressure：10 kg / cm2 l Hydraulic test pressure：13 kg / cm2 l Efficiency：100% l Power load：24KW l Equivalent evaporation：36 kg / h l Feed water pump motor：1 / 2 HP l Steam boiler size：L68 cm x W50 cm x H124 cm |
| Name | Laboratory Pad-Thermosol range |
| Model | PT-J |
| Explanation |
This machine can simulate the process of production. After padding, The samples are fixed onto the chain by clipped stick. Through these IR Pre-drying, drying, and thermosol processes, the samples will be delivered to the trough finally. The procedure can be changed according to users’ need. l Padding part：Horizontal type NBR rubber coated roller 125 mm diameter and 300 mm length. A rotatable chemical trough which consists four containers. l Pre-drying stage：12 infra-red heating lamps in two rows l Drying stage：Total length is 1800mm, Hot air circulation, the temperature range is 100°C ~ 180°C l Thermosol part：Total length is 1500mm, Hot air circulation, the temperature range is 250°C (max.) l Machine dimension：300 x 120 x 290 cm |
| Name | Laboratory Pad-Steam range |
| Model | PS-J |
| Explanation |
This range is suitable for the dyestuff which needs to be fixed by saturated steam process and for recipe making in continuous processing way. It takes less than 4 second for the dyed sample fabric to enter into the steam chamber. This feature helps to avoid the risk of oxidation before the reaction is completed. l Padding part：Horizontal type NBR rubber coated roller 125 mm diameter and 300 mm length l Steam chamber：Total length 6 meter, dwelling time 20 ~ 120sec l Water sea bath at outlet l Temperature range：Saturated steam 102℃ l Air compressor、washing compartments、steam generator can be added as per request of customer (optional) |
| Name | Laboratory tenter |
| Model | M-6 |
| Explanation |
It is used to simulate the production conditions such as temperature, reaction time, to produce the right samples for customer’s approval & the proven data for the following productions. With automatic fabric discharging device and receiving trough, it offers higher efficiency and speed to complete the continuous works. l Sample width： from 150mm up to 350mm. l Temperature range：Max. 250℃. Accuracy：+/- 1% l Electric data：220 / 380V x 3PH x 18KW. l Length of chamber：145 cm. l Circulation fan：3 sets of circulation fan motor l Chamber dwelling time：20sec ~ 6min |
| Name | Laboratory leather dyeing machine |
| Model | H-4+4 / H-8+8 |
| Explanation |
This machine is used in tanning, fatliquoring and dyeing in the engine of leather. User adds infiltrate agent into the dyeing drum, then adds the good light fastness dye and leveling dye agent. When the dyeing drum is rotating, leathers would deeply rubs with each other. This action is helpful for the colors to penetrate into the deeper and harder parts of the leather. It suits leather、thick non-woven fabric and finishing treatment works. l Electric data：220 / 380V x 3 PH x 12KW (or specify) l Rotary speed：0~60RPM adjustable l Drum size：acrylic made (Small) Diameter150Φ x 114L (hole dia.60Φ) (Big) Diameter250Φ x 111L (hole dia. 67Φ) l Machine dimension：H-(4+4)-116 x 73 x (76+42) cm、 H-(8+8)-182 x 73 x (76+42) cm |
| Name | Laboratory washing fastness tester |
| Model | HB-TYPE |
| Explanation |
Washing fastness test is one of the most important test for evaluation of textiles and the quality of clothes. This machine is designed to coincide the standard of CNS, AATCC, JIS, ISO, DIN, BS and so on. Except the main structure, the machine is produced from stainless steel material. The beaker is made of SUS 316L. It can resist acid and alkaline corrosion. The gasket with special materials can stand the dye stain and pollution. It has the characters of user-friendly, safe and durable and easy to do the maintenance. l Speed of rotate：40 ± 2RPM l Volume of beaker：(AATCC Standard) is 500± 50 ml & 1150± 50 ml l Steel ball：6mm (SUS) l Electric data：220 / 380V x 3PH x 15KW |
| Name | Laboratory Rubbing Fastness tester / Crock meter |
| Model | 331 |
| Explanation |
This device has been designed according to the Standard Testing Method of AATCC (American Association of Textile Chemists and Colorists) for testing the rubbing fastness of the textiles and the leather goods. l Rubbing hammer weight：900g l Rubbing distance：100 mm l Rubbing speed：60 rpm l Rubbing hammer diameter：16 mm l Digital counter：2 digits, auto-stop l Machine dimension：L65 x W25 x H22 cm |
| Name | Laboratory Color fastness rubbing tester |
| Model | 331 |
| Explanation |
For fabrics, leather, rubber, cardboard, plastic sheeting and so on, it can do the evaluation for the color fastness of friction and test the adhesion of color after the dyeing sample was rubbed. Binding the white cotton (dry or wet) on the face of friction cone. Using the cone with constant weight and frequency to rub the colored sample smoothly. and then putting the white cotton of cone beside the gray scale to determine the adhesion of color to be the grades of the color fastness of friction. By the way, this machine also test the friction strength of ink and evaluation of degree of abrasion, the test purpose is widely. l Max numbers of samples：6 pc / per times l Friction cone：2 x 2 cm、Radius 45 mm l Speed of friction：30 CPM l Distance of friction：100 mm l Load weight：200 g / 500 g (changeable) l Times control：Four digit counter, automatic shutdown when the set number is arrived. l Dimension size：W67 x D38 x H 40 cm l Weight：60 kg |
| Name | Laboratory Automatic Wrap Reel |
| Model | 311 |
| Explanation |
The device is used to measure threads of a fixed length, used together with a balance to take measurements of threads and capable of winding a fixed number of threads in accordance with tear testing machine in testing of thread arranging test. This instrument is designed for preparing leas of 120 yards or in meter of accurate length with uniform tension. It has an automatic yarn spreading device and stop motion. The stop motion will put off the automatic wrap reel automatically on the completion of full leas. Motorized Wrap Reel is used to wind yarn thread to a specified length, and then to test its strength of lea and quality. It can also be used for calculating the yarn count. l Circumference：1.5 yards or 1 meter l Bobbin stand：5 sets l Reeling speed： 200 rpm. l Count： 4 digits count controller. l Dimension： 90(W)×53(D)×62(H) cm. l Weight： 70 kg l Motor： 1/4HP |
| Name | Laboratory Perspiration Tester |
| Model | |
| Explanation |
It is used to determine color fastness (color staining / shade change) to water and perspiration in textiles. l Loading weight：(AATCC standard) 4.5 kg (ISO standard) 5.0 kg. l A stainless steel frame with a capacity of 20 samples held between acrylic separator plates. l Size of acrylic plate：110 x 65 x 3mm l Machine dimension：L20 x W10 x H17 cm. |
| Name | Laboratory Mullen Type Bursting strength Tester | |||||||||||||||||||
| Model | ||||||||||||||||||||
| Explanation |
This machine is used to test the strength of corrugated board, cardboard, fabrics, leather and so on. This machine uses hydraulic to expand rubber membrane to rupture the tested sample. This action is used to test the burst strength of sample. The anti-burst strength is the important feature for paper, fabrics, leather and so on. It suits to be the evidence in quality control for package or raw material business.
l Pressure gauge：diameter of face is “4” or “5” l Capacity：5、10、20、50、100 Choose two from these number. l Dimension size：53 x 40 x 55 cm l Weight：65 kg |
|||||||||||||||||||
| Name | Laboratory Pilling and Snagging Tester |
| Model | 328 |
| Explanation |
The fabrics and knitted fabrics are easily been pilled in use. According to this, user winds the sample around the rubber tube and put it in the cube box which is 23cm at each side. Every cube box is lined with the standard backing with four samples, and makes them rotated with 60 rpm. For the principle, the operating time of fabrics test is ten hours, knitted fabrics is five hours. The average consequence needs to be compared with the standard pilling grading. l Rotation boxes：A type：2 pc B type：4 pc l Turning space：23 x 23 x 23cm l Testing speed：60 rpm l Rubber tube：ψ31 x 150 l Accessory：four rubber tubes per box l Dimension size：75 x 51 x 52 cm l Weight：50 kg |
| Name | Laboratory Computer-controlled Hydrostatic Tester |
| Model | 322 |
| Explanation |
This machine suits to test the degree of anti-water of any thick, low air permeability and waterproof fiber, plastic fiber products, tape, canvas, clothes and so on. Commonly the tester has two types, active and static. With the computer-controlled monitor and easy operation, it suits the unit of quality control, research, and academy and so on. It can set the highest pressure and hold, and has automatic time counting. When the time is up, the machine will revert immediately. This testing machine has two-stage pressure acceleration system. It is essential and excellent machine for hydrostatic tester. l Test range：0.0005~2 kg /cm²(5~20000mmH2O). l Speed of pressure：0.06 kg /cm²(600mmH2O/min). 1 kg /cm²(10000mmH2O/min). l Display：kgf / cm², bar automatically exchange l Diameter of plate：ψ11.28 cm(100cm²). l Time control：1~999999 seconds and power will be off l Way of press：Air-pressure l The clamp of test specimen：Pneumatic control l Clamp force：Over 400 kg |
| Name | Laboratory Elmendorf Tearing Tester |
| Model | 329 |
| Explanation |
Cutting the same test specimen(63.5 x 100 mm) and default length, using potential energy principle to let the instrument swing to tear the specimen. The test needs to do five times for horizontal and vertical axis individually, and then take the average data to be the strength of the specimen. Our machine coincides the standard of QB / T1952. 1-2003、QB /1952. 2-2004、GB / T10357. 1-1989、QB / T1951. 2-1994 and so on. l Size of specimen：63.5 x 100 mm l Capacity：0~3200 g / 0~6400 g Double choices and attaching counterweight. l This machine has testing knife. l The indicator points out the strength of tearing directly. l Dimension size：47 x 25 x 38 cm l Weight：30 kg |
| Name | Laboratory spray tester |
| Model | 321 |
| Name |
This device is for testing humidity reception of fabrics after being put water. It is made according to AATCC Test Method 22-1985. This instrument is used to test the anti-wet ability. It uses quantitative water to drop onto the face of fabrics by 45 angular degree to observe the humidity for deciding the reception of fabrics. It is commonly used to test any fabric which is being done water-resistant or water repellent finishing works or not. l Specimen size：180 mm x 180 mm l Spray nozzle：Φ 0.889 mm x 19 holes l Capacity：250 ml l Machine dimension：30 x 32 x 62 cm l Weight：11 kg |
| Name | Laboratory Water Absorption Tester (Klemn Type) |
| Model | |
| Explanation |
This instrument is used for measuring the degree of water absorption. i.e. to check the capillary rise in millimeters by suspending a specimen in a vat filled with water. The capillary rise of water in fabrics is the water distance rise in a strip of a fabric suspended vertically with its lower end immersed in water. According to the way of Klemn test, this instrument is used to do the water absorption test of paper and cardboard. Drop the sample’s lower side in the water vertically and read the height of capillary rise in ten minutes. This equipment is suitable for blotting paper, absorbency paper and other similar grade of paper which are having water absorption to high l Sample：8 pc l Sample size：L20 x W2.5cm l Operation way：Manual screw driving l Sink dimension：364 x 76 x 60 mm l Machine dimension：42 x 25 x 49 cm l Weight：12 kg |
| Name | Laboratory rain tester |
| Model | 323 |
| Explanation |
To determine the penetration resistance of fabrics or composites at different intensities of water impact. Simulated rain horizontally impacts fabric samples mounted vertically in a stainless steel bath. Samples are backed with a standardized blotting paper which is weighed before and after each test. The rain is applied via a standardized nozzle. This instrument has been set pump storage tank and pumping to recycle the used water and easy to operate. l Test height：0.6,0.9~2.1,2.4 meter can be adjusted l Nozzle：ψ1+ 0.01mm x 13 holes l Dimension of water bath：L56 x W42 x H40cm l Level control：1. It has seven-staged overflow holes (0.6,0.9~2.1,2.4 Meter) l Timer：Max.: 999 seconds to set to stop pumping and testing. |
| Name | Laboratory fabric streak analyzer |
| Model | FA |
| Explanation |
The function of the Streak Analyzer is to isolate defects caused by physical differences. A fabric swatch is combined with polystyrene sheet film, and the Analyzer produces a plastic impression of a fabric surface by incorporating specific conditions of pressure and heat. The absence of color on the plastic impression ensures that only physical streak effects will be seen. The plastic impression is examined to determine whether the streak alignment matches the streaks observed on the fabric. If the streak analyzer indicates the same blemished pattern as seen in the fabric, then the blemished stripes are physical in nature. This can relate to several physical causes such as yarn tensions, stitch length, yarn count, twist differences, etc. The frame of this machine is made of stainless steel, the operation board is made of acrylic. Upper and lower plates are made of whole block of aluminum with pressure channel and heating ducts. Using three heating tubes, and every tube is three hundred thirty watts of power. Equipped with special gaskets and high-density packing collar to avoid the gas leakage. The machine is exquisite and convenient to operate. l Power：110 / 200V × 1PH l Size of sample：300 x 200 mm l Most of power：7kgs/cm2 l Accuracy of temperature：± 1°C l Dimension of size：L436 × W375 × H160 (mm) |
| Name | Laboratory Sublimation Tester / Scorch Tester |
| Model | 333-III (Three pc) or 333-V (Five pc) |
| Explanation |
The device is used for testing heat resistance of fibers, yarns, fabrics after being dyed with colors. l Digital indicate controller l Testing plate be controlled by heat switch separately l Size of testing plate：100 x 28 mm l Maximum testing temperature：300°C l Electric date：110 / 220 V x 1 Phase l Machine dimension：L55 x W43 x H36 cm |
| Name | Laboratory Standard multi-source supply of light box |
| Model | ML4 |
| Explanation |
Multiple light sources reveal the metamerism phenomenon when samples match under one set of lighting conditions and not under another. By using a specially designed color matching such as multi-light, you are assured of more consistent and accurate color matching at all times. l Light sources including：D65, A, UV, CWF, TL84, U30 l Resettable hour counter to indicate when lamps must be replaced. l Ultraviolet source can be used by itself or in combination with any of the light sources for detecting and evaluating optical brighteners, whitening agents or fluorescent dyes and pigments. l Meets or exceeds major international standards for visual color evaluation including：ASTM D1729, ISO3664, and CIE. l Electric data：110 / 220 V x 1 Phase. |
| Name | Laboratory Digital scale |
| Model | Weighing | Sentience(g) | Exterior precision | Size of plate(mm) | P.S. |
| AWH-15 | 7.5kg/15kg | 0.5/1 | 1/30000 | 230×280 | Two steps |
| AWH-30 | 15kg/30kg | 1/2 | 1/30000 | 230×280 | Two steps |
| Explanation |
This scale has the ability of simple counting and weighting, unit choosing about kg, catty, pounds and percent, checking weight: HI、OK、LO, automatic correcting and zero tracking, double over-weight safe and automatic changing sense of the amount of two-stage. It also has stable range of filter setting of fifteen stage, big LCD screen (132×49 mm LCD) is clean and easy to read with backlight, designed perfectly for deliver and protection. l Current：DC or AC l Voltage：110 / 220 V l Optional：RS-232, printer interface card and the ability of RELAY l Accuracy：±1g |